|
BULKHEAD FITTINGS AND COMBINATION
BULKHEAD FILTERS
To route fuel from the outside of the truck
to under the hood, and provide a means for hydrostatic relief.
In varieties to fit any application
Bulkhead Fittings
 |
 |
 |
 |
 |
 |
|
P/N: M116
3 Hole Bulkhead - 2 Top Inlet and Relief Valve ports are
drilled 90°. Outlet on bottom. All threads are 1/4 NPTF - U.L.
accepted. No U.L. mark needed for 12L14 Steel. |
P/N: M607
3 Hole Bulkhead - 2 Top Inlet and Relief Valve ports are
drilled 180°. Outlet on bottom. All threads are 1/4 NPTF - U.L.
accepted. No U.L. mark needed for 12L14 Steel |
P/N: M644
4 Hole Bulkhead - 3 Top Inlet and Relief Valve ports are a
tee. Outlet on bottom. All threads are 1/4 NPTF - U.L. accepted. No U.L.
mark needed for 12L14 Steel |
P/N: M1047
3 Hole Bulkhead -Low Profile - 2 Top Inlet and Relief
Valve ports are drilled 90°. Outlet on bottom. All threads are 1/4 NPTF
- U.L. accepted. No U.L. mark needed for 12L14 Steel |
P/N: M1235
3 Hole Bulkhead - Top Inlet and Relief Valve ports are
drilled 90°. Relief valve port is angled up 15°. Outlet on bottom. All
threads are 1/4 NPTF - U.L. accepted. No U.L. mark needed for 12L14
Steel |
P/N: T-444
3 Hole Bulkhead - 2 Top Inlet and Relief Valve ports are
drilled 180°. Outlet on bottom. All threads are 1/4 NPTF - U.L.
accepted. No U.L. mark needed for 12L14 Steel |
Bulkhead / Filter
Elements should be replaced at least once a
year. More often If the truck is used often or fuel quality is consistently
poor.
| Bulkhead Filter |
Components |
Repair Kit |
 |
 |
 |
|
P/N: 711-2
Bulkhead with 40 Micron filter Two Inlet / Relief Valve
ports drilled 90°. One bottom Outlet port. All threads are 1/4 NPTF U.L.
Listed |
Components for 711-2 Bulkhead Filter
include (3) felt elements, (1) 40 micron sintered bronze element, (1)
magnet, (1) Centering washer, (1) Tie bolt, (1) Tie bolt o-ring, (1) Tie
bolt seal, (1) Bowl gasket, Aluminum base and bowl. Nut and Lock washer. |
P/N: 711RK
Includes
(3) Felt Elements, (1) 40 Micron sintered bronze element, (1) Magnet
with centering washer, (1) Tie bolt o-ring, (1) Bowl to base gasket, (1)
Tie bolt to bowl seal, and instructions. |
 |
 |
 |
|
P/N: 713
Bulkhead with 5 Micron filter Two Inlet / Relief Valve
ports drilled 90°. One bottom Outlet port. All threads are 1/4 NPTF U.L.
Listed |
Components for 713 Bulkhead Filter
include (6) felt elements, (1) 40 micron sintered bronze element, (1) 5
micron sintered bronze element, (2) magnets, (2) Centering washers, (1)
Tie bolt, (1) Tie bolt o-ring, (2) Element o-rings, (2) Tie bolt seals,
(1) Bowl gasket, (1) spacer, Aluminum base and bowl. Nut and Lock
washer. Increased filter area and filtering capabilities for more
demanding systems. |
P/N: 713RK
Includes (6) Felt Elements, (1) 40 Micron sintered bronze
element, (1) 5 Micron sintered bronze element, (2) Magnets with
centering washers, (1) Tie bolt o-ring, (2) element o-rings,(1)
Bowl to base gasket, (2) Tie bolt to bowl / base seals, and
instructions. |
Filter
|
 |
|
|
F201
BEAM Inline
Filter - 1/4 NPTF Female pipe thread inlet, 1/4
NPTF Male pipe thread outlet. |
|
|
